Wallpaper Calculator

Calculate how many rolls of wallpaper you need for a room, using the standard UK roll size (0.52 x 10 m) and pattern repeat.

How Many Rolls of Wallpaper Do I Need?

Ordering wallpaper is less forgiving than ordering paint: rolls from different print runs (different "batch" or "lot" numbers) can vary slightly in shade, so running one roll short partway through a job often means a colour mismatch, not just a quick top-up trip. The wallpaper calculator above works out the number of rolls you need from your room's dimensions, your doors and windows, the roll size you've chosen, and — the detail most plain area calculators miss — the pattern repeat of the design.

The core idea starts the same way a paint calculation does: wall area (perimeter x height) minus the area of doors and windows gives the net area to cover. Wallpaper adds one twist: rolls can only be cut at whole multiples of the pattern repeat — the vertical distance before a patterned design repeats — so the usable wall height must be rounded up to the next full repeat before the area is even calculated. That rounding is where most hand estimates quietly end up a roll short.

How to Use the Wallpaper Calculator

  1. Enter the room's length, width, and ceiling height, choosing metric or imperial units.
  2. Enter the number of doors and windows, plus their average height and width — sensible defaults are pre-filled, but adjust them if yours differ.
  3. Choose a roll-size preset that matches what you're buying — EU standard, UK standard, or US double roll — or type in the exact width and length on the packaging.
  4. Enter the pattern repeat from the roll label (0 for a plain or random-match design). The bigger this number, the more the calculator rounds your usable height up, and the more waste that rounding builds in.
  5. Set a waste allowance for trimming and mismatched cuts — 10% is the standard starting point; push it higher for a busy, large-repeat pattern or a first-time job.
  6. Read off the number of rolls to buy and the estimated total cost.

The Formula Behind the Numbers

The calculation runs in four stages. First, the pattern-repeat adjustment: your room's actual height is rounded UP to the next whole multiple of the pattern repeat, since a roll can only be cut in full-repeat lengths and the leftover from every cut is wasted. Second, the gross wall area: the room's perimeter (2 x (length + width)) times that adjusted height. Third, subtract the openings — each door's and window's height x width, summed and taken off the gross area — to get the net area to paper. Fourth, divide the waste-adjusted net area by the area one roll actually covers (roll width x roll length) and round up, since you can't buy part of a roll.

Worked example: a room 4 m long and 3.5 m wide with a 2.4 m ceiling, one door (2.03 m x 0.86 m) and one window (1.2 m x 1.0 m), papered with a standard EU roll (0.53 m x 10.05 m) with a 0.64 m pattern repeat and a 10% waste allowance.

Pattern-repeat-adjusted height: 2.4 m ÷ 0.64 m = 3.75, rounded up to 4, so 4 x 0.64 = 2.56 m — taller than the actual ceiling because of the repeat rounding. Perimeter: 2 x (4 + 3.5) = 15 m. Gross area: 15 x 2.56 = 38.4 m². Openings: (2.03 x 0.86) + (1.2 x 1.0) = 1.75 + 1.2 = 2.95 m² (rounded). Net area: 38.4 − 2.95 = 35.45 m².

With 10% waste: 35.45 x 1.10 = 38.99 m². One roll covers 0.53 x 10.05 = 5.33 m². Rolls needed: 38.99 ÷ 5.33 = 7.32, rounded up to 8 full rolls.

Pro Tips and Common Mistakes

The single biggest source of wasted money is the pattern repeat, and it's the step most people skip when estimating by hand. A large repeat (60 cm or more, common on bold botanical or geometric designs) can push your effective height — and therefore your roll count — up noticeably compared with a plain or small-repeat paper on the exact same wall.

At around £30 per roll, our worked example above (a 4 m x 3.5 m room, 8 rolls needed on a UK-standard roll) comes to roughly £240 in wallpaper alone. Most DIY and homeware suppliers in Gibraltar import UK-brand ranges, so UK roll sizing and pricing are the closest local reference point.

  • Buy all your rolls in one order and check every roll shares the same batch or lot number on the label — rolls from different print runs can differ slightly in colour, obvious once side by side on a wall.
  • A roll's stated length is the total length on the tube, not the usable length after pattern matching — a large repeat can waste 15-20% or more of a roll before you cut the first drop.
  • Buy one extra roll beyond the calculated total on any job with a repeat pattern, an irregular room, or a first DIY attempt — far cheaper than a special order from a batch that may already be sold out.
  • Keep at least half a roll's worth of leftover paper after the job — pattern-matched wallpaper is hard to source again for repairs years later.